This page is part of archived documentation for openHAB 3.3. Go to the current stable version
# TouchWand Binding
Touchwand Wanderfull™ Hub basic is a plug & play Z-Wave based controller that uses Wi-Fi and Bluetooth to easily connect all smart home components. TouchWand products are compatible with most major Z-Wave products, IP controlled devices and KNX devices, providing the ideal solution for building all-inclusive full-featured smart homes. TouchWand.com (opens new window)
# Supported Things
This binding supports switches, shutters dimmers alarm sensors and wall controllers configured in Touchwand Wanderfull™ Hub Controller. The binding also supports AcWand™ (opens new window) - smart control for your air conditioner controller.
# Control and Status
- switch - control - ON/OFF
- shutter - control - UP/DOWN/STOP
- dimmer - control - ON/OFF/BRIGHTNESS
- wallcontroller - control - LONG/SHORT
- alarmsensor - status channels depend on alarm sensor type
- bsensor - binary status channels depend on alarm sensor type (motion, door , smoke)
- thermostat - AcWand™ smart control for your air conditioner
# Discovery
After adding TouchWand Hub the auto discovery will add all suppored devuces to inbox. Auto discovery scans priodically and add to the Inbox new devices added to the Touchwand Wanderfull™ Hub
# Bridge Configuration
Touchwand Wanderfull™ Hub Controller need to be added manually by IP address. The controller requires username and password
| Parameter | Description | Units | required |
|---|---|---|---|
| username | Touchwand hub username | string | yes |
| password | Touchwand hub password | string | yes |
| ipAddress | Touchwand hub hostname or IP address | string | yes |
| port | Management port (default 80) | integer | no |
| addSecondaryUnits | If the controller is primary, add secondary controllers units as well | bool | no |
# Thing Configuration
No thing configuration is needed
# Channels
note Touchwand Wanderfull™ supports various types of alarm sensors such as water leak, door/window sensor and motion sensor. Alarm Sensor thing represents a generic sensor, relevant sensor channels will be displayed once a sensor is added as a Thing.
# Switch Shutters Channels
| Channel Type ID | Item Type | Description |
|---|---|---|
| switch | Switch | This channel supports switching the device on and off. |
| shutter | Rollershutter | This channel controls the shutter position |
| brightness | Dimmer | This channel supports adjusting the brightness value. |
| wallaction | String | This channel indicate SHORT or LONG wallcontroller button pressed |
# Alarm Sensors Channels
| Channel Type ID | Item Type | Description |
|---|---|---|
| illumination | Number:Illuminance | This channel shows the current illuminance measured by the sensor. |
| temperature | Number:Temperature | This channel shows the current temperature measured by the sensor. |
| leak | Switch | This channel alert when water leak is detected by the sensor |
| motion | Switch | This channel alert when motion detected by the sensor. |
| smoke | Switch | This channel alert when smoke detected by the sensor. |
| isOpen | Contact | This channel shows the status of Door/Window sensor. |
| battery_level | Number | This channel shows the battery level. |
| battery_low | Switch | This channel indicates whether the battery is low or not. |
# Thermostat Channels
| Channel Type ID | Item Type | Description |
|---|---|---|
| State | Switch | Set and read the device state ON or OFF. |
| targetTemperature | Number:Temperature | Shows the current set point of the thrermostat. |
| roomTemperature | Number:Temperature | Shows the current termprature measured by the thermostat. |
| mode | String | Set/Read Thermostat mode - Cool, Heat, Fan, Dry, Auto |
| fanLevel | String | Set/Read fan leval - Low, Medium, High, Auto |
# Full Example
# touchwand.things
Things can be defined manually The syntax for touchwand this is
Thing <binding_id>:<type_id>:<thing_id> "Label" @ "Location"
Where <thing_id> is the unit id in touchwand hub.
Bridge touchwand:bridge:1921681116 [ipAddress="192.168.1.116", username="username" , password="password"]{
Thing switch 408 "Strairs light"
Thing switch 411 "South Garden light"
Thing dimmer 415 "Living Room Ceiling dimmer"
Thing switch 418 "Kitchen light"
Thing shutter 345 "Living Room North shutter"
Thing shutter 346 "Living Room South shutter"
}
# touchwand.items
/* Shutters */
Rollershutter Rollershutter_345 "Living Room North shutter" {channel="touchwand:shutter:1921681116:345:shutter"}
Rollershutter Rollershutter_346 "Living Room South shutter" {channel="touchwand:shutter:1921681116:346:shutter"}
/* Switches and Dimmers */
Switch Switch_408 "Stairs light" {channel="touchwand:switch:1921681116:408:switch"}
Switch Switch_411 "South Garden light" {channel="touchwand:switch:1921681116:411:switch"}
Dimmer Switch_415 "Living Room Ceiling dimmer" {channel="touchwand:switch:1921681116:415:switch"}
Switch Switch_418 "South Garden light" {channel="touchwand:switch:1921681116:418:switch"}