This page is part of archived documentation for openHAB 3.3. Go to the current stable version
# Somfy myLink Binding
This binding supports the Somfy myLink (opens new window) device for control of Somfy RTS blinds/shades.
# Supported Things
Currently these things are supported:
- bridge (Somfy MyLink bridge, which can discover roller shades and scenes)
- roller shades (UP, DOWN, STOP control of a roller shade).
This binding has been tested with myLink firmware 5.23.
# Discovery
To use auto discovery first setup a Somfy MyLink bridge, then supply its IP address and system id. The system id can be found in the integration settings -> Control4 section of your My Link app. Once the Somfy MyLink bridge is ONLINE you can start a scan that will detect and add to your Inbox any discovered roller shades.
# Thing Configuration
# mylink
| Parameter | Parameter ID | Required/Optional | Description |
|---|---|---|---|
| IP or Hostname | ipAddress | Required | Hostname or IP Address of the myLink device |
| System Id | systemId | Required | The system id configured on the myLink device |
# shade
| Parameter | Parameter ID | Required/Optional | Description |
|---|---|---|---|
| Target ID | targetId | Required | Address of shade in the Somfy system |
# scene
| Parameter | Parameter ID | Required/Optional | Description |
|---|---|---|---|
| Scene ID | sceneId | Required | Address of scene in the Somfy system |
# Channels
The following channels are supported by the binding. Note that specific weather station models may support only some or all of these channels.
| Channel ID | Item Type | Description |
|---|---|---|
| shadeControl | Rollershutter | Device control (UP, DOWN, STOP) |
| scenelist | String | Comma-separated list of scenes of form sceneId=sceneName |
| button | Switch | Button to trigger a scene or rule |
# Example
# Things
Bridge somfymylink:mylink:mylink1 "myLink Bridge" @ "Office" [ ipAddress="192.168.1.1", systemId="mysystemidhere" ] {
Thing shade shade1 "Living Room" [ targetId="CC114A21.1" ]
}