This page is part of archived documentation for openHAB 3.3. Go to the current stable version
# SMA Energy Meter Binding
This Binding is used to display the measured values of a SMA Energy Meter device. It shows purchased and grid feed-in power and energy.
# Supported Things
This Binding supports SMA Energy Meter devices.
# Discovery
The Energy Meter is discovered by receiving data on the default multicast IP address.
# Binding Configuration
No binding configuration required.
# Thing Configuration
Usually no manual configuration is required, as the multicast IP address and the port remain on their factory set values. Optionally, a refresh interval (in seconds) can be defined.
# Channels
Channel | Description |
---|---|
powerIn | Purchased power |
powerInL1 | Purchased power L3 |
powerInL2 | Purchased power L2 |
powerInL3 | Purchased power L3 |
powerOut | Grid feed-in power |
powerOutL1 | Grid feed-in power L1 |
powerOutL2 | Grid feed-in power L2 |
powerOutL3 | Grid feed-in power L3 |
energyIn | Purchased energy |
energyInL1 | Purchased energy L1 |
energyInL2 | Purchased energy L2 |
energyInL3 | Purchased energy L3 |
energyOut | Grid feed-in energy |
energyOutL1 | Grid feed-in energy L1 |
energyOutL2 | Grid feed-in energy L2 |
energyOutL3 | Grid feed-in energy L3 |
# Full example
N/A
Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)
← SleepIQ SmartMeter →