This page is part of archived documentation for openHAB 3.3. Go to the current stable version
# Millheat Binding
This binding integrates the Mill Wi-Fi enabled panel heaters. See https://www.millheat.com/mill-wifi/ (opens new window)
# Supported Things
This binding supports all Wi-Fi enabled heaters as well as the Wi-Fi socket.
account
= Mill Heating API - the account bridgeheater
= Panel/standalone heaterroom
= A room defined in the mobile apphome
= A home defined in the mobile app
# Discovery
The binding will discover homes with rooms and heaters.
In order to do discovery, add a thing of type Mill Heating API and add username and password.
# Thing Configuration
See full example below for how to configure using thing files.
# Account
username
= email address used in apppassword
= password used in apprefreshInterval
= number of seconds between refresh calls to the server
# Home
homeId
= id of home, type number (not string). Use auto discovery to find this value
# Room
roomId
= id of room, type number (not string). Use auto discovery to find this value
# Heater
macAddress
= network mac address of device in UPPERCASE.
Can be found in the app by viewing devices. Or you can find it during discovery. Used for heaters connected to a room.heaterId
= id of device/heater, type number (not string) Use auto discovery to find this value. Used to identify independent heaters or heaters connected to a room.power
= number of watts this heater is consuming when active.
Used to provide data for the currentPower channel.
Either macAddres
or heaterId
must be specified.
# Channels
# Home channels
Channel | Read/write | Item type | Description |
---|---|---|---|
vacationMode | R/W | Switch | Vacation mode active. Note: In order to activate vacation mode, both vacationModeStart and vacationModeEnd must be set to valid values |
vacationModeAdvanced | R/W | Switch | Vacation mode advanced active. Can only be activated after vacation mode is active |
vacationModeTargetTemperature | R/W | Number:Temperature | Temperature to use when activating vacation mode. Note: If advanced vacation mode is set, this temperature is ignored and the away temperature for each room is used instead |
vacationModeStart | R/W | DateTime | Vacation mode start |
vacationModeEnd | R/W | DateTime | Vacation mode end |
# Room channels
Channel | Read/write | Item type | Description |
---|---|---|---|
currentTemperature | R | Number:Temperature | Measured temperature in your room (if more than one heater then it is the average of all heaters) |
currentMode | R | String | Current mode (comfort, away, sleep etc) being active |
targetTemperature | R | Number:Temperature | Current target temperature for this room (managed by the room program and set by comfort- away- and sleepTemperature) |
comfortTemperature | R/W | Number:Temperature | Comfort mode temperature |
awayTemperature | R/W | Number:Temperature | Away mode temperature |
sleepTemperature | R/W | Number:Temperature | Sleep mode temperature |
heatingActive | R | Switch | Whether the heaters in this room are active |
program | R | String | Name of program used in this room |
# Heater channels
Channel | Read/write | Item type | Description |
---|---|---|---|
currentTemperature | R | Number:Temperature | Measured temperature by this heater |
targetTemperature | R/W | Number:Temperature | Target temperature for this heater. Channel available only if heater is not connected to a room |
currentPower | R | Number:Power | Current power usage in watts. Note that the power attribute of the heater thing config must be set for this channel to be active |
heatingActive | R | Switch | Whether the heater is active/heating |
fanActive | R/W | Switch | Whether the fan (if available) is active (UNTESTED) |
independent | R | Switch | Whether this heater is controlled independently or part of a room setup |
window | R | Contact | Whether this heater has detected that a window nearby is open/detection of cold air (UNTESTED) |
masterSwitch | R/W | Switch | Turn heater ON/OFF. Channel available only if heater is not connected to a room |
# Full Example
millheat.things:
Bridge millheat:account:home "Millheat account" [username="email@address.com",password="topsecret"] {
Thing home monaco "Penthouse Monaco" [ homeId=100000000000000 ] // Note: numeric value
Thing room office "Office room" [ roomId=200000000000000 ] Note: numeric value
Thing heater office "Office panel heater" [ macAddress="F0XXXXXXXXX", power=900, heaterId=12345 ] Note: heaterId is a numeric value, macAddress in UPPERCASE
}
millheat.items:
// Items connected to HOME channels
Number:Temperature Vacation_Target_Temperature "Vacation target temp [%d %unit%]" <temperature> {channel="millheat:home:home:monaco:vacationModeTargetTemperature"}
Switch Vacation_Mode "Vacation mode" <vacation> {channel="millheat:home:home:monaco:vacationMode"}
Switch Vacation_Mode_Advanced "Use room away temperatures" <vacation> {channel="millheat:home:home:monaco:vacationModeAdvanced"}
DateTime Vacation_Mode_Start "Vacation mode start [%1$td.%1$tm.%1$ty %1$tH:%1$tM]" <vacation> {channel="millheat:home:home:monaco:vacationModeStart"}
DateTime Vacation_Mode_End "Vacation mode end [%1$td.%1$tm.%1$ty %1$tH:%1$tM]" <vacation> {channel="millheat:home:home:monaco:vacationModeStart"}
// Items connected to ROOM channels
Number:Temperature Heating_Office_Room_Current_Temperature "Office current [%.1f %unit%]" <temperature> {channel="millheat:room:home:office:currentTemperature"}
Number:Temperature Heating_Office_Room_Target_Temperature "Office target [%.1f %unit%]" <temperature> {channel="millheat:room:home:office:targetTemperature"}
Number:Temperature Heating_Office_Room_Sleep_Temperature "Office sleep [%.1f %unit%]" <temperature> {channel="millheat:room:home:office:sleepTemperature"}
Number:Temperature Heating_Office_Room_Away_Temperature "Office away [%.1f %unit%]" <temperature> {channel="millheat:room:home:office:awayTemperature"}
Number:Temperature Heating_Office_Room_Comfort_Temperature "Office comfort [%.1f %unit%]" <temperature> {channel="millheat:room:home:office:comfortTemperature"}
Switch Heating_Office_Room_Heater_Active "Office active [%s]" <fire> {channel="millheat:room:home:office:heatingActive"}
String Heating_Office_Room_Mode "Office current mode [%s]" {channel="millheat:room:home:office:currentMode"}
String Heating_Office_Room_Program "Office program [%s]" {channel="millheat:room:home:office:program"}
// Items connected to HEATER channels
Number:Power Heating_Office_Heater_Current_Energy "Energy usage [%d W]" <energy> {channel="millheat:heater:home:office:currentEnergy"}
Number:Temperature Heating_Office_Heater_Current_Temperature "Heater current [%.1f %unit%]" <temperature> {channel="millheat:heater:home:office:currentTemperature"}
Number:Temperature Heating_Office_Heater_Target_Temperature "Heater target [%.1f %unit%]" <temperature> {channel="millheat:heater:home:office:targetTemperature"}
Switch Heating_Office_Heater_Heater_Active "Heater active [%s]" <fire> {channel="millheat:heater:home:office:heatingActive"}
Switch Heating_Office_Heater_Fan_Active "Fan active [%s]" <fan> {channel="millheat:heater:home:office:fanActive"}
Contact Heating_Office_Heater_Window "Window status [%s]" <window> {channel="millheat:heater:home:office:window"}
Switch Heating_Office_Heater_Independent "Heater independent [%s]" <switch> {channel="millheat:heater:home:office:independent"}
Switch Heating_Office_Heater_MasterSwitch "Heater masterswitch [%s]" <switch> {channel="millheat:heater:home:office:masterSwitch"}
# Setting up vacation mode
In order to activate vacation mode, follow these steps in a rule:
- Set start time (DateTime) on
DateTime
item linked to channel typevacationModeStart
- Set end time (DateTime) on
DateTime
item linked to channel typevacationModeEnd
- Activate vacation mode on
Switch
item linked to channel typevacationMode
- Optional - set advanced vacation mode on
Switch
item linked to channel typevacationModeAdvanced
Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)