This page is part of archived documentation for openHAB 3.3. Go to the current stable version

# Bosch Smart Home Binding

Binding for the Bosch Smart Home.

# Supported Things

# In-Wall switches & Smart Plugs

A simple light control.

Thing Type ID: in-wall-switch

Channel Type ID Item Type Writable Description
power-switch Switch Current state of the switch.
power-consumption Number:Power Current power consumption (W) of the device.
energy-consumption Number:Energy Energy consumption of the device.

# TwinGuard smoke detector

The Twinguard smoke detector warns you in case of fire and constantly monitors the air.

Thing Type ID: twinguard

Channel Type ID Item Type Writable Description
temperature Number:Temperature Current measured temperature.
temperature-rating String Rating of the currently measured temperature.
humidity Number:Dimensionless Current measured humidity (0 to 100).
humidity-rating String Rating of current measured humidity.
purity Number:Dimensionless Purity of the air (ppm). Range from 500 to 5500 ppm. A higher value indicates a higher pollution.
purity-rating String Rating of current measured purity.
air-description String Overall description of the air quality.
combined-rating String Combined rating of the air quality.

# Door/Window contact

Detects open windows and doors.

Thing Type ID: window-contact

Channel Type ID Item Type Writable Description
contact Contact Contact state of the device.

# Motion Detector

Detects every movement through an intelligent combination of passive infra-red technology and an additional temperature sensor.

Thing Type ID: motion-detector

Channel Type ID Item Type Writable Description
latest-motion DateTime The date of the latest motion.

# Shutter Control

Control of your shutter to take any position you desire.

Thing Type ID: shutter-control

Channel Type ID Item Type Writable Description
level Rollershutter Current open ratio (0 to 100, Step 0.5).

# Thermostat

Radiator thermostat

Thing Type ID: thermostat

Channel Type ID Item Type Writable Description
temperature Number:Temperature Current measured temperature.
valve-tappet-position Number:Dimensionless Current open ratio of valve tappet (0 to 100).
child-lock Switch Indicates if child lock is active.

# Climate Control

A virtual device which controls up to six Bosch Smart Home radiator thermostats in a room.

Thing Type ID: climate-control

Channel Type ID Item Type Writable Description
temperature Number:Temperature Current measured temperature.
setpoint-temperature Number:Temperature Desired temperature.

# Wall Thermostat

Display of the current room temperature as well as the relative humidity in the room.

Thing Type ID: wall-thermostat

Channel Type ID Item Type Writable Description
temperature Number:Temperature Current measured temperature.
humidity Number:Dimensionless Current measured humidity (0 to 100).

# Security Camera 360

Indoor security camera with 360° view and motion detection.

Thing Type ID: security-camera-360

Channel Type ID Item Type Writable Description
privacy-mode Switch If privacy mode is enabled, the camera is disabled and vice versa.
camera-notification Switch Enables or disables notifications for the camera.

# Security Camera Eyes

Outdoor security camera with motion detection and light.

Thing Type ID: security-camera-eyes

Channel Type ID Item Type Writable Description
privacy-mode Switch If privacy mode is enabled, the camera is disabled and vice versa.
camera-notification Switch Enables or disables notifications for the camera.

# Intrusion Detection System

Allows to retrieve notifications in case of intrusions. The system can be armed and disarmed and alarms can be muted.

Thing Type ID: intrusion-detection-system

Channel Type ID Item Type Writable Description
system-availability Switch Indicates whether the intrusion detection system is available.
arming-state String Read-only channel to retrieve the current arming state. Possible values are SYSTEM_ARMING, SYSTEM_ARMED and SYSTEM_DISARMED.
alarm-state String Read-only channel to retrieve the current alarm state. Possible values are ALARM_OFF, PRE_ALARM, ALARM_ON, ALARM_MUTED and UNKNOWN.
active-configuration-profile String The name of the active configuration profile used for the intrusion detection system.
arm-action String Arms the intrusion detection system using the given profile ID (default is "0").
disarm-action Switch Disarms the intrusion detection system when an ON command is received.
mute-action Switch Mutes the alarm when an ON command is received.

# Limitations

  • Discovery of Things
  • Discovery of Bridge

# Discovery

Configuration via configuration files or UI (see below).

# Bridge Configuration

You need to provide the IP address and the system password of your Bosch Smart Home Controller. The IP address of the controller is visible in the Bosch Smart Home Mobile App (More -> System -> Smart Home Controller) or in your network router UI. The system password is set by you during your initial registration steps in the Bosch Smart Home App.

A keystore file with a self-signed certificate is created automatically. This certificate is used for pairing between the Bridge and the Bosch Smart Home Controller.

Press and hold the Bosch Smart Home Controller Bridge button until the LED starts blinking after you save your settings for pairing.

# Getting the device IDs

Bosch IDs for found devices are displayed in the openHAB log on bootup (OPENHAB_FOLDER/userdata/logs/openhab.log)

The log can also be called using the following command.

tail -f /var/log/openhab/openhab.log /var/log/openhab/events.log

Alternatively, the log can be viewed using the OpenHab Log Viewer (frontail) via http://openhab:9001 (opens new window).

Example:

2020-08-11 12:42:49.490 [INFO ] [chshc.internal.BoschSHCBridgeHandler] - Found device: name=Heizung id=hdm:HomeMaticIP:3014F711A000XXXXXXXXXXXX
2020-08-11 12:42:49.495 [INFO ] [chshc.internal.BoschSHCBridgeHandler] - Found device: name=-RoomClimateControl- id=roomClimateControl_hz_1
2020-08-11 12:42:49.497 [INFO ] [chshc.internal.BoschSHCBridgeHandler] - Found device: name=-VentilationService- id=ventilationService
2020-08-11 12:42:49.498 [INFO ] [chshc.internal.BoschSHCBridgeHandler] - Found device: name=Großes Fenster id=hdm:HomeMaticIP:3014F711A000XXXXXXXXXXXX
2020-08-11 12:42:49.501 [INFO ] [chshc.internal.BoschSHCBridgeHandler] - Found device: name=-IntrusionDetectionSystem- id=intrusionDetectionSystem
2020-08-11 12:42:49.502 [INFO ] [chshc.internal.BoschSHCBridgeHandler] - Found device: name=Rollladen id=hdm:HomeMaticIP:3014F711A000XXXXXXXXXXXX
2020-08-11 12:42:49.502 [INFO ] [chshc.internal.BoschSHCBridgeHandler] - Found device: name=Heizung id=hdm:HomeMaticIP:3014F711A000XXXXXXXXXXXX
2020-08-11 12:42:49.503 [INFO ] [chshc.internal.BoschSHCBridgeHandler] - Found device: name=Heizung Haus id=hdm:ICom:819410185:HC1
2020-08-11 12:42:49.503 [INFO ] [chshc.internal.BoschSHCBridgeHandler] - Found device: name=-RoomClimateControl- id=roomClimateControl_hz_6
2020-08-11 12:42:49.504 [INFO ] [chshc.internal.BoschSHCBridgeHandler] - Found device: name=PhilipsHueBridgeManager id=hdm:PhilipsHueBridge:PhilipsHueBridgeManager
2020-08-11 12:42:49.505 [INFO ] [chshc.internal.BoschSHCBridgeHandler] - Found device: name=Rollladen id=hdm:HomeMaticIP:3014F711A000XXXXXXXXXXXX
2020-08-11 12:42:49.506 [INFO ] [chshc.internal.BoschSHCBridgeHandler] - Found device: name=Rollladen id=hdm:HomeMaticIP:3014F711A000XXXXXXXXXXXX
2020-08-11 12:42:49.507 [INFO ] [chshc.internal.BoschSHCBridgeHandler] - Found device: name=Central Heating id=hdm:ICom:819410185

# Thing Configuration

You define your Bosch devices by adding them either to a .things file in your $OPENHAB_CONF/things folder like this:

Bridge boschshc:shc:1 [ ipAddress="192.168.x.y", password="XXXXXXXXXX" ] {
  Thing in-wall-switch bathroom "Bathroom" [ id="hdm:HomeMaticIP:3014F711A000XXXXXXXXXXXX" ]
  Thing in-wall-switch bedroom "Bedroom" [ id="hdm:HomeMaticIP:3014F711A000XXXXXXXXXXXX" ]
  Thing in-wall-switch kitchen "Kitchen" [ id="hdm:HomeMaticIP:3014F711A000XXXXXXXXXXXX" ]
  Thing in-wall-switch corridor "Corridor" [ id="hdm:HomeMaticIP:3014F711A000XXXXXXXXXXXX" ]
  Thing in-wall-switch livingroom "Living Room" [ id="hdm:HomeMaticIP:3014F711A000XXXXXXXXXXXX" ]

  Thing in-wall-switch coffeemachine "Coffee Machine" [ id="hdm:HomeMaticIP:3014F711A0000XXXXXXXXXXXX" ]

  Thing twinguard      tg-corridor    "Twinguard Smoke Detector" [ id="hdm:ZigBee:000d6f000XXXXXXX" ]
  Thing window-contact window-kitchen "Window Kitchen"           [ id="hdm:HomeMaticIP:3014F711A00000XXXXXXXXXX" ]
  Thing window-contact entrance       "Entrance door"            [ id="hdm:HomeMaticIP:3014F711A00000XXXXXXXXXX" ]

  Thing motion-detector  motion-corridor "Bewegungsmelder"      [ id="hdm:ZigBee:000d6f000XXXXXXX" ]
}

Or by adding them via UI: Settings -> Things -> "+" -> Bosch Smart Home Binding.

# Item Configuration

You define the items which should be linked to your Bosch devices via a .items file in your $OPENHAB_CONF/items folder like this:

Switch Bosch_Bathroom    "Bath Room"    { channel="boschshc:in-wall-switch:1:bathroom:power-switch" }
Switch Bosch_Bedroom     "Bed Room"     { channel="boschshc:in-wall-switch:1:bedroom:power-switch" }
Switch Bosch_Kitchen     "Kitchen"      { channel="boschshc:in-wall-switch:1:kitchen:power-switch" }
Switch Bosch_Corridor    "Corridor"     { channel="boschshc:in-wall-switch:1:corridor:power-switch" }
Switch Bosch_Living_Room "Living Room"  { channel="boschshc:in-wall-switch:1:livingroom:power-switch" }

Switch Bosch_Lelit       "Lelit"        { channel="boschshc:in-wall-switch:1:coffeemachine:power-switch" }

Or by adding them via UI: Settings -> Items -> "+".