AirVisual Node Binding

This is an openHAB binding for the AirVisual Node Air Quality Monitor (opens new window) (also known as IQAir AirVisual Pro).

Supported Things

There is one supported Thing, the "avnode".

Discovery

Binding will do autodiscovery for AirVisual Node by searching for a host advertised with the NetBIOS name 'AVISUAL-<SerialNumber>'.

All discovered devices will be added to the inbox. Please note you will need to set the Node username and password in the configuration of the newly discovered thing before a connection can be made.

Binding Configuration

The binding has no configuration options, all configuration is done at Thing level.

Thing Configuration

The thing has a few configuration parameters:

Parameter	Description
address	Hostname or IP address of the Node
username	The Node Samba share username. Default is 'airvisual'
password	The Node Samba share password
share	(Optional) The Node SMB share name. Default is 'airvisual'
refresh	(Optional) The time (in seconds) to refresh the Node data. Default is 60, min is 30

Required configuration parameters can be obtained by pressing the center button on the Node for "Settings Menu" > "Network" > "Access Node data" tab.

Channels

The binding supports the following channels:

Channel ID	Item Type	Description
co2	Number:Dimensionless	CO2 level, ppm
humidity	Number:Dimensionless	Relative humidity, %
aqi	Number:Dimensionless	Air Quality Index (US)
pm_25	Number:Density	PM2.5 level, µg/m³
temperature	Number:Temperature	Temperature
used_memory	Number	Used memory
timestamp	DateTime	Timestamp
battery-level	Number	Battery level, %
signal-strength	Number	Wi-Fi signal strength, 0-4

The Node updates measurements data every 5 minutes in active mode and every 15 minutes in power saving mode (screen off).

Example

Thing

The preferred way to add AirVisual Node to the openHAB installation is autodiscovery, but the AirVisual Node also can be configured using .things file:

airvisualnode:avnode:1a2b3c4 [ address="192.168.1.32", username="airvisual", password="12345", share="airvisual", refresh=60 ]

Items

Here is an example of items for the AirVisual Node:

Number:Temperature Livingroom_Temperature "Temperature [%.1f %unit%]" <temperature> {channel="airvisualnode:avnode:1a2b3c4:temperature"}
Number:Dimensionless Livingroom_Humidity "Humidity [%d %unit%]" <humidity> {channel="airvisualnode:avnode:1a2b3c4:humidity"}
Number:Dimensionless Livingroom_CO2_Level "CO₂" {channel="airvisualnode:avnode:1a2b3c4:co2"}
Number:Dimensionless Livingroom_Aqi_Level "Air Quality Index" { channel="airvisualnode:avnode:1a2b3c4:aqi" }
Number:Density Livingroom_Pm25_Level "PM2.5 Level" { channel="airvisualnode:avnode:1a2b3c4:pm_25" }
DateTime Livingroom_Aqi_Timestamp "AQI Timestamp [%1$tH:%1$tM]" { channel="airvisualnode:avnode:1a2b3c4:timestamp" }

Rules

Example rules:

rule "AirVisual Node Temperature Rule"
when
    Item Livingroom_Temperature changed
then
    if (Livingroom_Temperature.state > 25.0|°C) {
        logInfo("avnode.rules", "Temperature is above 25°C")
    }
end

rule "AirVisual Node Humidity Rule"
when
    Item Livingroom_Humidity changed
then
    if (Livingroom_Humidity.state < 35.0|%) {
        logInfo("avnode.rules", "Humidity is below 35%")
    }
end

rule "AirVisual Node CO₂ Level Rule"
when
    Item Livingroom_CO2_Level changed
then
    if (Livingroom_CO2_Level.state > 1000.0|"ppm") {
        logInfo("avnode.rules", "CO₂ level is above 1000 ppm")
    }
end

rule "AirVisual Node PM2.5 Level Rule"
when
    Item Livingroom_Pm25_Level changed
then
    if (Livingroom_Pm25_Level.state > 25.0|"µg/m³") {
        logInfo("avnode.rules", "PM2.5 level is above 25 µg/m³")
    }
end

Sitemap

Example sitemap:

sitemap home label="Home" {
    Frame label="Living Room" {
        Text item=Livingroom_Temperature
        Text item=Livingroom_Humidity
        Text item=Livingroom_CO2_Level
        Text item=Livingroom_Aqi_Level
        Text item=Livingroom_Pm25_Level
    }
}

Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)